When the Wi-Fi stops working, most people switch the router off and on and hope. That does fix a fair number of problems, but if it keeps happening you need to find the cause. Work through these steps in order. Each one rules something out.
Step 1: Is it the Wi-Fi or the internet?
These are two different things. Your Wi-Fi is the wireless link between your devices and the router. Your internet is the line from the router to the outside world. Either can fail.
Look at the lights on your router. Most have one for the internet connection, often labelled “Internet”, “Broadband” or with a globe symbol. If it is red, orange or off, the fault is with your broadband line and no amount of changing Wi-Fi settings will help. Skip to step 3.
If the internet light is normal, the problem is more likely to be the Wi-Fi itself.
Step 2: Is it one device or all of them?
Try a second device in the same room.
- Only one device is affected. The problem is with that device. Switch its Wi-Fi off and on, restart it, and if that fails, tell it to “forget” the network and join again with the password.
- Everything is affected. The problem is with the router or the line. Carry on.
Step 3: Restart the router properly
Switch the router off at the wall, wait a full 30 seconds, and switch it back on. Give it five minutes to settle before you test. Pressing the button on the front for a moment is often not enough.
If you have separate boxes, such as a fibre modem and a router, or extra Wi-Fi units around the house, switch them all off, then turn them back on one at a time starting with the one the line comes into.
If the internet light stays red after this, ring your broadband provider. They can test the line from their end, and the fault is theirs to fix.
Step 4: Check where the router is
Wi-Fi is a radio signal, and it is weakened by distance, walls, floors, mirrors, fish tanks and large metal objects. A router on the floor behind the television, or in a cupboard under the stairs, is working with one hand tied behind its back.
Put it as close to the middle of the home as the line allows, off the floor and out in the open. This costs nothing and often makes the biggest difference.
Step 5: Find the dead spots
Walk around with a phone and watch the Wi-Fi symbol. If the signal is strong near the router and poor at the far end of the house, upstairs or in a garden office, you have a coverage problem, and no setting will fix it. The signal simply does not reach.
The answer is more than one source of Wi-Fi:
- A mesh system replaces or adds to your router with two or three units that work together. Your devices move between them without you noticing. This is the right answer for most homes.
- A wired access point, connected to the router by a network cable, is the most reliable option where a cable can be run, and the best one for a garden office.
- Plug-in Wi-Fi extenders are cheap, but they repeat a signal that is already weak, so they often disappoint.
Step 6: Slow at certain times?
If the Wi-Fi is fine in the morning and poor in the evening, the cause is usually one of these:
- Too much happening at once. Several video streams, a games console downloading an update and a video call will fill a slower broadband line.
- Neighbours’ Wi-Fi. In flats and terraces, many networks compete for the same airwaves. A newer router that uses the 5 GHz or 6 GHz bands suffers far less.
- An old router. The router your provider sent seven years ago was built for a handful of devices. A modern home has dozens.
To see what you are actually getting, run a speed test on a computer plugged into the router with a cable, then again over Wi-Fi in the room where it is slow. If the cabled test is slow, the line is the limit. If the cabled test is fast and the Wi-Fi test is slow, the Wi-Fi is the limit.
Step 7: Check for updates and unwanted guests
- Update the router. Routers have their own software, and updates fix faults and security holes. Most can update from their settings page or their app.
- Change the Wi-Fi password if it has been shared widely over the years or is still the one printed on the router. Then you know that only your own devices are using it.
When to get help
Call someone in if:
- You have worked through these steps and it still drops out.
- You need Wi-Fi to reach a garden office, a loft room or an outbuilding.
- You want a mesh system or wired access points installed and set up properly.
- You work from home and cannot afford for it to be unreliable.
We help home users in Egham and the surrounding area with exactly this, on a no-fix, no-fee basis. See home IT support for what we do and what it costs.
If the problem is at work, the causes are different. See poor Wi-Fi in the office.