Insights

Poor Wi-Fi in the office: causes and fixes for small businesses

By Gavin Bresler. Published .

Poor Wi-Fi is the complaint we hear most often when we first visit an office. Calls drop in the meeting room, the far desks crawl, and everyone has learned which corner to avoid. It is nearly always fixable, and the fix is rarely “buy a faster internet connection”.

First, find out what kind of problem it is

Office Wi-Fi fails in three different ways, and each has a different cure.

  • Coverage. The signal does not reach. It works near the router and fades with distance.
  • Capacity. The signal reaches, but too many devices are sharing it. It works at 8 am and struggles at 11.
  • The internet line. The Wi-Fi is fine and the connection behind it is slow or unreliable.

A simple test separates them. Plug a laptop into the network with a cable and run a speed test. Then run the same test over Wi-Fi at the desk that complains most. If the cabled result is poor, look at the line. If the cabled result is good and the Wi-Fi result is poor, look at the Wi-Fi.

Cause 1: One router trying to cover the whole office

The box your internet provider supplied is a router, a switch and a Wi-Fi access point in one, built to a price for a home. In an office it usually sits where the line comes in, which is often a corner, a cupboard or the comms cabinet.

Wi-Fi signals weaken through walls, floors, glass partitions and metal cabinets. One access point in the wrong place cannot cover an office of any size.

The fix: separate access points, mounted on the ceiling where people actually work and connected by network cable. Two or three well-placed access points will do more than any single powerful one.

Cause 2: Too many devices on one access point

Count the devices, not the people. Each person brings a laptop and a phone, and the office adds printers, a door entry system, a television in the meeting room and a smart speaker somebody plugged in. Thirty devices on a home-grade router is asking a lot.

The fix: business-grade access points are designed to handle many devices at once and to spread them between access points. We fit Ubiquiti UniFi equipment for this reason.

Cause 3: Wi-Fi extenders

Plug-in extenders are the usual first attempt at a fix. They pick up a weak signal and repeat it, which usually cuts the speed sharply and adds another thing to go wrong. Devices also cling to the extender or the router long after they should have switched.

The fix: remove them, and put in cabled access points.

Cause 4: Interference from next door

In a shared building, every other office has its own Wi-Fi, and they all compete for the same channels. Older equipment that only uses the crowded 2.4 GHz band suffers most.

The fix: modern access points use the 5 GHz and 6 GHz bands, which have far more room, and choose their channels to avoid the neighbours.

Cause 5: Everything on one network

When staff laptops, visitors’ phones, the printers and the card machine all share one network, a visitor’s laptop with a problem becomes your problem. It is also a security risk: anyone given the Wi-Fi password can see your shared equipment.

The fix: separate networks for staff, guests and devices, all carried by the same access points. Guests get internet access and nothing else.

Cause 6: The cabling and switches behind it

Access points are only as good as what they are plugged into. An old switch, a damaged cable or a daisy chain of small switches under desks will hold back even the best Wi-Fi.

The fix: proper switches in the cabinet, tested cabling, and labelled ports so that faults are quick to trace.

What a proper fix looks like

  1. Survey. Walk the office, see where people work and what the walls are made of, and check the signal at the desks.
  2. Design. Decide how many access points are needed and where, and what has to change behind them.
  3. Install. Fit and cable the access points, set up the separate networks and test at every desk.
  4. Manage. Keep the equipment updated and watch it, so a failed access point is noticed before anyone complains.

A small office typically needs two to four access points. The cost depends mostly on how easy it is to run cable to the ceiling.

What not to spend money on

  • A faster internet package, until you have proved the line is the bottleneck.
  • A more powerful router of the same home-grade kind. The problem is usually position and capacity, not power.
  • More extenders.

Need a hand?

We design, install and manage business networks and Wi-Fi for offices across Surrey, London and the neighbouring counties. A free IT review includes a look at your Wi-Fi coverage and what it would take to put it right.

For Wi-Fi trouble at home, see how to fix Wi-Fi problems at home.

Gavin Bresler runs GB Tech Support LTD and has worked in IT for over 28 years. We provide IT support for businesses in Surrey, London and the neighbouring counties. If any of this sounds familiar, book a free IT review.

Ready to hand over your IT?

Start with a free review of your IT: about an hour, no obligation, and a short written summary of what we find.